Mooretown Sports and Leisure Centre

Question: Discuss about the Mooretown Sports and Leisure Centre. Answer: Introduction The task puts an emphasis on PAMS investigation and mind mapping. Here the condensed PAMS analysis means 'Purpose, Audience, Message and Style'. In view of these determinants of PAMS analysis, the report of the Mooretown sports and leisure centre is drafted. The motivation behind archiving the report is clear. The Mooretown sports and leisure centre needs to advise the global audience about the effort program and the repercussion of the centre. The intended interest group is young men and women at secondary school level, who can participate in any sort of games (Singh and Aggarwal 2014). In the meantime, the rich and official individuals are encouraged to become the members of the clubs. They are asked to give the stipulated sum for social welfare and group benefit. PAMS Analysis To start with the examination, one finds that "Purpose" outlines the record. A veritable question goes like what is the reason for composing the present report? Another question is how one composes the report? The purpose decides the document, from wanting to the real execution. In the meantime, "purpose" shapes the tone, dialect structure, composing style and selects the key audience. It shapes the report and addresses the pivotal areas, identified with the particular enthusiasm of the audience (Zhang et al. 2016). The purpose determines the trajectory of the document, from the first stage to its logical culmination. In the meantime, 'Purpose' shapes the tone, dialect structure, composing style and selects the key audience. It shapes the document and addresses the pivotal regions, identified with the particular enthusiasm of the mass at large (Zhang et al. 2016). The variable 'audience' is inseparably identified with the 'purpose' of the document. The writing style, tone, and arrangement are the basic determinants of any sort of work. In the meantime, the key factor 'Purpose' characterizes the overarching character of the document, its confining style and the perusing impact on the audience. The audience is another fundamental point since they are the essential clients of the books. The next significant aspect is 'message', which each author needs to convey to the huge gathering of people. The message is the most imperative data that the author needs to pass on to the group of onlookers. In the meantime, the message ought to be clear and lucid. For instance, if the writer delivers a convoluted message to the crowd, then the work should not be valued. The style is another important part of any composition. The style decides the 'Purpose' of the document. It is a general component that structures a vital piece of the written work. The style involves the structure of the body, tone, dialect and right arrangement. Mind Mapping Mind Mapping manifests the disparate integration of the factors covered in the PAMS analysis. The Mooretown Sports and Leisure centre needs to advise the global audience about the comprehensive efforts of the centre. The intended interest group is young men and women at secondary school level, who can participate in any sort of games (Singh and Aggarwal 2014). In the meantime, the rich and official individuals are urged to wind up distinctly the individuals of the clubs. They are asked to give the stipulated sum for social welfare and group benefit. Another crucial aspect is "message" in the area. The writer of the report needs to send an imperative message to the worldwide group of onlookers. He guarantees one thing that the message goes to the correct group of onlookers at the right time. The last element is "style" of the document. For the most part, the style of the report ought to be scholarly and persuasive. In the segment, the writer of the report amasses all important data and meshes them into a scholastic account. He keeps up the tone, dialect and the composition structure of the report. Operation Time of the Centre The opening hours of Mooretown Sports and Leisure centre are 6 AM 10 PM. Meanwhile, the apex time span starts from Monday to Friday and the time portion is 12 PM 2 PM, 8 AM 2 PM on Saturday. The bistro is staffed by casuals and Mooretown University students engaged in various activities (Denicolo 2013). Clubs and Program of Centre Mooretown Sports and Leisure centre comprises varied aspects. It is noted that 65% of a social event are hardly aware of any program of the centre, 30% of them have the familiarity with two or fewer sports activities, and just 5% of them emphasizes two undertakings. Mooretown Sports Centre depends on more than 10 clubs and just 2% tenants of Mooretown utilize these clubs. Conclusion and Recommendation In the wake of making the review and shaping this report, I appreciate the state of Mooretown Sports and leisure centre. I propose two or three recommendations, which are ideally for Mooretown Sports and leisure Centre and help to make it the best of all. The Mooretown Centre needs to cross out all affirmations and leases which are done in past and make new contracts for all clubs, as per the current state of this centre. Mooretown Centre needs to make online mechanized information, which resolves the crisis of missed booking. The Centre needs to set up a correspondence structure better with the remote system. The Centre should not focus on manual booking and reservation technique and the methodology should be done with modified framework (Chien et al. 2015). The data must be recorded in online PC information. The Centre needs to prepare for all clubs. The stipulated amount must be constrained to 15% (Gierski et al. 2015). The Centre requires the entire all the additionally publicizi ng to move its clubs. It needs to begin some progressing activities outside for it. This is several proposals, which make Mooretown Centre all the additionally enchanting and best for all. I expect that association and chief office regard the recommendation and take some genuine choice for the change of the Mooretown Sports and Leisure centre. References Chien, W., Xiao, J., Ding, L.W., Muzakar, M.I.B., Sun, Q.Y., Gery, S., Senapedis, W., Shacham, S., Baloglu, E. and Koeffler, H.P., 2015. Novel PAK4 allosteric modulators (PAMs) provide potential therapeutic options in human gastric cancer. Denicolo, P. ed., 2013. Achieving impact in research. Sage. Gierski, F., Spada, M.M., Fois, E., Picard, A., Naassila, M. and Van der Linden, M., 2015. Positive and negative metacognitions about alcohol use among university students: Psychometric properties of the PAMS and NAMS French versions. Drug and alcohol dependence, 153, pp.78-85. McKay, D., Kim, S.K., Taylor, S., Abramowitz, J.S., Tolin, D., Coles, M., Timpano, K.R. and Olatunji, B., 2014. An examination of obsessive-compulsive symptoms and dimensions using profile analysis via multidimensional scaling (PAMS). Journal of anxiety disorders, 28(4), pp.352-357. Olatunji, B.O., Kim, S.K. and Wall, D., 2015. Extracting body image symptom dimensions among eating disorder patients: The Profile Analysis via Multidimensional Scaling (PAMS) approach. Body image, 15, pp.16-23. Sellam, T., Cijvat, R., Koopmanschap, R. and Kersten, M., 2016. Blaeu: mapping and navigating large tables with cluster analysis. Proceedings of the VLDB Endowment, 9(13), pp.1477-1480. Singh, V. and Aggarwal, A., 2014, December. Performance analysis of middleware distributed and clustered systems (PAMS) concept in mobile communication devices using Android operating system. In Parallel, Distributed and Grid Computing (PDGC), 2014 International Conference on (pp. 345-349). IEEE. Villalpando, L.E.B., April, A. and Abran, A., 2016, June. CloudMeasure: A Platform for Performance Analysis of Cloud Computing Systems. In Cloud Computing (CLOUD), 2016 IEEE 9th International Conference on (pp. 975-979). IEEE. Zecchin, C., Facchinetti, A., Manohar, C., Kudva, Y., Levine, J., Basu, A., Sparacino, G., Dalla Man, C. and Cobelli, C., 2013, February. PHYSICAL ACTIVITY MEASURED BY PAMS VS. CGM TRENDS: CORRELATION ANALYSIS. In DIABETES TECHNOLOGY THERAPEUTICS (Vol. 15, pp. A77-A77). 140 HUGUENOT STREET, 3RD FL, NEW ROCHELLE, NY 10801 USA: MARY ANN LIEBERT INC. Zhang, Y., Xiang, C., Yang, H., Li, Y. and Hao, L., 2016, August. Static analysis of novel continuum robot driven by PAMs. In Ubiquitous Robots and Ambient Intelligence (URAI), 2016 13th International Conference on (pp. 96-100). IEEE.

Nature Journal Essays (2455 words) - Agkistrodon,

Nature Journal Introduction Wildlife is always deemed to be of great significance economically, ecologically, environmentally as well as culturally. It includes a wide range of species from amphibians, insects, birds to mammals. Thus, there is no doubt that there are some organisms that are native while others were introduced or re-introduced to their current habitant (Day, Klingler & Bloomberg 283). The essay is an in-depth examination of five wild animals that exist in the United States of America. These animals are Red Fox (Vulpes vulpes), Northern Harrier (Circus cyaneus), Black and Yellow Garden Spider (Argiope aurantia), Northern Copperhead (Agkistrodon contortrix mokasen) and American Bullfrog (Rana catesbeiana). To be able to cover these species adequately, the following will be established: - Are the species, being studied, native or introduced in that environment? - Describe their physical characteristics in terms of color as well as specific differences between the sexes. Additionally, the issues regarding the species' habitats are adequately tackled. This is attained by establishing their local habitat as well as their habitat range, their ecological role, the types of food they eat and other relevant relationships such as parasitism, mutualism are brought to light. The species' category under IUCN is also brought to light. At the same time, discover life cycle of these species and life span as well as how they coexist with people. Red Fox (Vulpes vulpes) According to Rue (72), Red fox is the largest of animals that is considered as true foxes. This species is in the family of Canidae which is comprised of wolves, dogs and coyotes. These animals are characterized by an orange or red fur. Red foxes have white fur on their chest as well as beneath their neck. The tail is usually fluffy and white at the tip. The ears are black and pointed. Their legs are colored black. The animal is about three feet long and weighs 10 pounds. As suggested by Clapham (122), Red fox inhabits a greater part of the United States as well as Canada, but there is no record to show that they ever existed in Alaska and Texas. According to IUCN, it is categorized as Least Concern for extinction and named as world's worst alien invasive species. They have a wide range covering approximately 70 million square kms including wood lands, farmland as well as prairies. Historically, red foxes were being preyed by lynx, wolves, and bobcats but due to the reduced number of these predators, people became the major predator hunting these animals for various reasons, such as sport hunting, as well as for their fur or by farmers in protecting their crops and livestock (Rue 121). It is thus no doubt that red fox has a long association with mankind. This can be depicted in human folklore as well as in myths. Red foxes are opportunistic feeders whose feeding pattern varies with season as they eat everything available during some period. Generally speaking, this species is omnivorous eating fruits, grasses and berries. They also feed on birds, insects, small mammals. They can investigate over five miles looking for food despite the fact that they are not hungry. Surplus food stuffs are hidden to be consumed later (Clapham 54). With regards to reproduction, red foxes reproduce only once a year during spring. Female estrus lasts for 21 days during which the male mates with her for a number of days in burrows during which there is at least an hour of copulation tie. The gestation period is approximately two months. Prior to littering, the female/vixen will get two den ready. The litter size ranges between 4 and 8. As the female is nursing the litter, males look for food. Within a period of about 2 weeks, the kits open their eyes, and 4 days after, lower teeth start emerging. The juvenile takes a period of six to seven months, and then, the adulthood comes. It has been established that in their natural habitat, the red foxes attain a maximum of five years and fourteen while under captivity (Rue 65). These mammals are nocturnal and can hear voices in lower frequencies. They stalk their prey just like the cat does, then pounce and chase. Dens are utilized for reproduction reasons. Red foxes sleep in open environment using their tail to save warmth (Clapham 23). Northern Harrier (Circus cyaneus) Also known as marsh hawk, the bird is between 17 and 24 inches with a wing span ranging from 3.5 to 4.5 feet weighing between 12 and 18 ounces. Males are typically smaller than females.

Case Study on Bond Industry Technology

Case Study on Bond Industry Technology Bond Industry Technology (Preliminary analysis of BITs Enterprise Architecture) Introduction From a wide perspective of what is actually the business structure of BIT, there are numerous problems which require analyzing and correcting. However, when we look at this scenario, there are so many variable required for BIT to meet its required goals. The business structure is more complex and thus, it may be addressed at a later time. Business wise Plastik strategic goals are not being met due to the fact that the fragmented structure of BITA will not allow any form of Encouragement Corporation between the Bus. Contrary to this, the senior management at BITA have come have been concerned with the fact that their decisions are being made on a month old data. There is a rising need for accurate and timely data, and this matter is pressing more since offices were opened interstate and overseas and time zone appears to be different between NZ, Sydney, Perth and Germany. There also appears to be a problem in data exchange and report preparation is also a problem. Compounding on this, it has been found that customer handling or branch enquiries is also a problem since the window for BITA to receive data and work on divisional data or respond to enquiries can be as short as 3-4 hours per day. These are mainly the two problems that are affecting BIT and thus for Plastik to be able to meet its targets, them both of this problems have to be solved. Motivation and Objective of the Report The information world has greatly changed, which means that there are no more such things as information can only be processed at a certain time only. Baring this in mind them it is possible to understand why some of the customers are developing e-commerce applications for its IT capabilities. Contrary to that, we have seen that, BIT information processing strategy is not working out and thus if Plastik is to continue using this method in the Australian branch then the company is doomed to fail. Additionally, the corporate structure for BITA and Plastik is in such a way that there is no interface between BITA and Plastik global knowledge base which leaves BITA and its customers in the shadow when it comes to participating in the Plastik global knowledge base. The objectives of this report are as follows: Develop a better strategy for BITA to accurate information and on a timely manner to all the countries regarding their time zones Come up with a better strategy for data exchange and report preparation as well as customer handling Enhance on the enterprise system so that divisional information processing will take more than the time that was taking at first (3-4 hours per day). Provide a link between BITA and Plastik global knowledge base so that BITA and its customers can participate in Plastik’s global knowledge base without difficulty. Maps of the current Business Organizational Structure and a (AS-IS) From the scenario, it is easy to obtain the information that, all the branches of BIT managed their own data. Whereas all the data was brought to the Germany parent company for final processing and storage. However, when we look at the organizational structure of BIT we obtain the fact that, under the overall umbrella which in this case is the BIT there are different partitions that come out of it. From this parent company, there are smaller Business Units (BUs) which are independent and handle different parts of the growing business. These include BIT – Sales referred to as BITS, BIT – Engineering referred to as BITE and BIT – Consulting which is also known as BITCON. Contrary to that, it is important to know that each BU operates as an individual business, with their own staff and administrative processes. However there is a central office and administration functions which are responsible for all the staff. This is known as BITA below is a map that has been produced to show all the above business functions of BITA. It is clear that Plastik is the main owner of BITA. However, from this diagram, it is clear that BITA has its own operations which are headed at BITA. The two companies are not connected despite the fact that Plastik owns BITA. Note that all these business functions have their own work as part of the BITA. BITCON was mainly established to act as a consulting arm of BIT. This unit provides all the consulting services to the local manufacturers on a range of plastics related issues ranging from design, manufacturing, process reengineering as distribution. Also, you will notice that this unit has a considerable expertise in the industry and offer their clients solutions some of which may be good for BIT products. BITS are used to recognize the market for plastic raw material as well as related chemicals. Some forms of plastics that are found to be sold by the company include PVCs. Polypropylene, Polystyrene, just to name the few. Most of these materials which mainly come from petroleum are found in Australia. Contrary to all these, it is important to note that SB’s main aim was to produce such things as routers, milling machines and lathes. However, lathe was segregated into its own division. This is why BITS came up with an engineering business unit. The company is much known from its expertise in engineering equipment manufacture together with the fact that it has a well renown staff who are much skilled in engineering. Most of its raw materials however, come from local and international suppliers. This ensures continuity of supply it carries inventory comprised of components which are frequently used as well as raw materials from other countries. All these Bus have their own management strategy while the overall tasks are done at the headquarters which is BITA. Landscape Map for Value chain Based Business Despite the fact that, Plastik acquired BIT, the company is still using the old system. However, it seem like after the acquisition Plastik made BIT to actually run separately. Their main acquisition was made in order to establish a good relationship with Great Wall with a view to a future buyout or partnership to supply machinery and expertise to the giant Chinese plastic market. In fact Plastic acquisition of BITA was mainly to connect with China so as to become a major profit contributor. This has enabled the company to move into small Australian market which was designed to actually extend the company global representation. Plastik business units have all been separated into different and independent BUs just like the BITA business units. The company strives at complementing its engineering expertise by presenting itself as an expert consultant on all the aspects of plastics fabrications which are mainly found in the RD, manufacturing operations, to marketing and distribution. It can be seen that all these functions are all presented under one single unit. It is however important to note that after acquiring BITA Plastik will have to formulate another form of business map. This is because BITA unlike Plastik has its units being operated separately even though their operations are all liked at the headquarters which is BITA. This also means that Plastik will either make some of its operations fall under some units of BITA or change BITA strategic map so that they can actually be on the same ground. Plastik actually did not; change the structure of BITA after its acquisition. However, it renamed the Australian company BITA and installed an outsider as its CEO. As far as the company is concerned most of its Australian branches have been strengthened as well as expanded to New Zealand. However, their operation at New Zealand is relatively smaller and as compared to the one in Australia while the sales that it makes are smaller as compared to the Australian company. It is important that Plastik maintains this structure so as to keep the core competencies in the company the way they are. These are basically the company’s key processes or functions. Note that they all have different function in the company. However, this value chain was constructed by the original owner of BITA which was after the realization that there was a need for a head office which would be used to head all the other business functions, therefore BIT is the head office or in my case BITA is the head office. This is actually what Plastik came to name as BITA. The Engineering unit of the company was raised to help the company with electronics manufacturing. This was however set up mainly after the company started manufacturing Machinery and Lathe. However, Plasik is required to understand that in order for them to manage a manufacturing shop that is more specialized; they are required to understand project management, procurement, and production and distribution skills. BITE only managed to expand after the department had established a more profitable and large engineering business which the ability to export large machinery. The consultant department of BITA will bring more value to Plastik, in that with the experience in plastic fabrication BITCON as a consulting arm of BIT was set up for the main purpose of providing consulting services to the local manufacturers which was done mainly on a wide range of plastic related issues. These included such things as engineering, distribution and so on. As far as value chain is concerned, the work of BITS is mainly to supply the plastics that have been produced by BITA. Plastic uses this part of the company to actually supply its own plastic to the other parts of Australia and China. The important aspect and one that really requires noting is the fact that, BITS services are mainly given to a majority of large as well as small customers. This means that the unit’s services are mainly known by the Australian markets. Process/BU/Application relationships There is a big difference between the process at BITA and processes at Plastik. However in both the companies it can be seen that there are some form of relationship between the process. Looking at BITA, there is a very firm relationship between the BUs in that they need each other to actually progress. Engineering sections which is also known as the BITE was mainly put up to create machines and other products which are for sales. It is through this unit that the company manages to actually ensure a correct order which reflects the requirements of the customers. Plastik has come to use this unit in Germany to speed up plastic injection molding and finishing equipment form Great Wall Industries in Szechwan, China. Considering the fact that Plastik produces large amounts of products the BITA consulting part is a very important part to them. This is because BITCON provides a consulting service both to the local manufacturers which are mainly done on a range of plastic related issues which range from designing to distributing of the products. While the BITS helps Plastik to supply their product to the various markets. Strategic Assessment between Bus and BITA and BITA and Plastik Looking at the two relationships, strategically BUs and BITA compound very well. This is because, even though all the BUs has their own operations and manages them by themselves, it is found that they are all headed by the BITA. However, looking at BITA and Plastik there is some form of separation between the two. This is because when we consider their operations, BITA operates in different BUs whereas with Plastik all the operations seem to be under the same roof. It is important to ensure that there is a connection between BITA and Plastik so that BITA and BITA customers will be able to use Plastik knowledge base. In addition to that, technologically Plastik is far much ahead of BITA and thus by ensuring that the two are connected this will improve their technology. As per their CEO Plastik wants to install e-commerce services which will also be important to BITA and BITA customers as it will enable information processing and customer handling to be done in the right way. Opportunities for Improvement and Recommendation There are a lot of opportunities for improvement that Plastik can grasp. Considering the fact that the company has not installed ecommerce applications, it is important at they think of this for it will give their customers a much wider options regarding their services acquisition. Contrary to that, the company can adopt the structure of BITA but make sure that they improve on the information processing and handling issues that the company is having at the moment. This strategy seems easy to use since having different business units manage their own tasks makes it easy to actually know which of the operations in the value chain require more money or which one requires improvement. As a recommendation thus, Plastik should make sure to improve on the company’s data processing method which if they do not take care will impact their business on a very negative way. Contrary to that, they should also make sure that they connect the two companies so that customers and the BITA will manage to use their knowledge base.

How to Make Colored Fire Pinecones

How to Make Colored Fire Pinecones How can you make your fire more festive? Toss on a few colored fire pinecones! Colored fire pinecones are extremely easy to make. All you need is one common household chemical. Colored Fire Pinecone Materials dry pineconesboric acid (usually sold as a disinfectant in the pharmacy section of stores)alcohol (optional) Alcohol is not necessary for this project, but it is a good accelerant if you are having trouble getting your pinecones to burn, which is possible if they are still a little green. Also, alcohol burns with a blue flame, so it will add another color to the fire yet wont overpower the other flame colors in your pinecone. Methanol is sold as Heetâ„ ¢ fuel treatment (avoid contact with skin). Isopropyl alcohol (rubbing alcohol) or ethanol (e.g., from rum or vodka) work well, too. Methods of Preparing Colored Fire Pinecones Method #1: This is the quick-and-easy method of getting pinecones to burn in colors. Sprinkle a little boric acid powder onto the pinecone. Squirt a small amount of alcohol onto the pinecone. Light the pinecone. Method #2: Dissolve the boric acid in a small amount of water or alcohol. Soak the pinecones in the colorant solution and allow them to dry. Boric acid is a good chemical for this project because its easily obtained, safe, and can give you a full spectrum of flame colors. However, any of the safe colorants for making colored fire can be used to make colored fire pinecones, so dont be afraid to experiment with other chemicals. You can prepare colored pinecones in advance to give as gifts or to burn throughout the season. If you like, you can scent the pinecones by adding a small amount of cinnamon oil or potpourri fragrance. Disclaimer: Please be advised that the content provided by our website is for EDUCATIONAL PURPOSES ONLY. Fireworks and the chemicals contained within them are dangerous and should always be handled with care and used with common sense. By using this website you acknowledge that ThoughtCo., its parent About, Inc. (a/k/a Dotdash), and IAC/InterActive Corp. shall have no liability for any damages, injuries, or other legal matters caused by your use of fireworks or the knowledge or application of the information on this website. The providers of this content specifically do not condone using fireworks for disruptive, unsafe, illegal, or destructive purposes. You are responsible for following all applicable laws before using or applying the information provided on this website.

Discussion Board 2 EDU 626 Essay Example | Topics and Well Written Essays - 500 words

Discussion Board 2 EDU 626 - Essay Example All the materials and physical objects that an instructor might use to deliver the information to the students or participants are called instructional media. Formally, it can be defined as "the physical means via which instruction is presented to the learners" (Reiser and Dempsey, 2007- pg 18). For instance usage of a text book, computer or even the in-class physical demonstration of an instructor can be labeled as an instructional medium. In any Instruction System Design (ISD), instructional media is used to make the audience understand the delivered material. It may be used to get the participant’s attention, to invoke the imagination of the students, to or to explain the explicit/implicit instructional goals. A research-based theory or a model is termed as Instruction System Design or Development (ISD). Such a model is designed after repeated experiments with different set of conditions (Merrill & Boutwell, 1973). It is important to note that each model is entirely dependa nt on its designer’s perceptions and ones understanding of the requirements for the instructional process. Once it is decided that an instructional medium is helpful in the process, there are number of factors to be considered before selecting a particular medium. Selection should be made after careful analysis of cost, availability, and the practical implementation of the entire course syllabus.

Group Discussion Essay Example | Topics and Well Written Essays - 250 words

Group Discussion - Essay Example ependent from the client company to avoid any conflicts of interest that may arise due to any links relationship between the auditor and the company (Regan, 2003). The contracting of one of Mary Maid Service partner’s uncle to carry out auditing casts doubts over the auditing process. The Uncle may give false opinion about the company in order to maintain good relationships with his nephew/niece who is one of the shareholders. Additionally, by charging low fees, the Uncle might be protecting his commercial interests. Most audit firms that charge fees lower than market rate make up for the deficit by providing non-audit services such as tax advice. In such a case, the interests of the auditor to protect his commercial interests may contradict with protecting shareholders’ interests. Contracting the partner’s Uncle may also expose the company to self-interest threat from the partner. Therefore, it is in the best interest of Mary Maid Service that the Uncle to one of the partner’s does not audit the company’s financial statements. Public confidence in financial markets and the conduct of public interest partly relies on audit reports; the company should contract an independent auditor to avoid compromising the credibility of the reports and opinions (Regan,

Discuss the character of Banquo and his role in Macbeth Essay Example for Free

Discuss the character of Banquo and his role in Macbeth Essay Banquo was one of Duncans brave generals. He was a man of honour and integrity. He held the same rank as Macbeth and they were very closely linked characters. They were courageous and loyal warriors. They both witnessed the Witches prophesies and their future successes were foretold throughout the play. Banquo had a generous spirit and a rational view of the world and had the attributes required by a good King, however, Banquo was an ambiguous character, in that he was sceptical of Macbeths manner following their encounter with the Witches. Macbeths beliefs worried Banquo, as he was a good man and he believed deeply in upholding Gods rule of order. Banquo sensed that the Witches prophesies prompted new reactions in Macbeth further encouraging his ambitions towards kingship. Banquos first encounter with the Witches was quite unbelievable to him and he remarked to Macbeth, What are these, So withered, and so wild in their attire, That look not like thinhabitants oth earth, And yet are on,t? , Banquos words describe Macbeths startled and uneasy reaction to the Witches prophesies, touching moral confusion in Macbeth by saying to him, Good sir, why do you start, and seem to fear Things that do not sound so fair? The half rhyme fear and fair echoes the Witches previous fair and foul. Although Banquo was not afraid of the Witches, he still wanted them to speak to him but at the same time he wished to remain detached from them. He addressed the Witches, saying, Speak to me, who neither beg, nor fear Your favours nor your hate. The Witches in turn replied, Thou shalt get Kings, though thou be none. The Witches directed most of their prophesies towards Macbeth and Banquo noticed how lost in thought his companion was because of this experience and remarked, Look how our partners rapt. When the Witches vanished, Banquo and Macbeth were astounded, wondering if what they had just witnessed was indeed real or just fantasy. When Banquo heard that Macbeth was to become Thane of Cawdor, in contrast to Macbeths excitement, he showed wariness and sensed that the Witches words might be deceitful by telling Macbeth, And oftentimes, to win us to our harm, The instruments of darkness tell us truths, Win us with honest trifles, to betrays In deepest consequence. Banquo is clear-sighted in his summary of the way of temptation. However, resisting the prophecies was a struggle, even for Banquo. He said to his son Fleance, Merciful powers, Restrain in me the cursed thoughts that nature Gives way to in repose! Banquo was clearly disturbed by all the strange events that had taken place. He was afraid to sleep and the Witches words returned to him in his dreams when he did so. After King Duncan was murdered, Banquo became very suspicious of Macbeth and was becoming concerned about his destiny. He spoke of this to the Kings son Malcolm, In the great hand of God I stand, and thence Against the undivulged pretence I fight Of treasonous malice. However, I criticize Banquo because of his passivity when he says, soon afterwards, Thou hast it all now, King, Cawdor, Glamis, all As the weird women promised, and I fear Thou playdst most foully fort: It was obvious that Banquo suspected Macbeths involvement in Duncans death, yet he took no steps against Macbeth. I suspect this was because Banquo had ambition too, like Macbeth when he says, May they not be my oracles as well, And set me up in hope? But hush, no more. Macbeths prophecy had come true, so he hoped, perhaps it would all happen for him and he would father a line of Kings. Banquos inaction and suspicions of Macbeth attracted Macbeths attention as his soliloquy in Act 3 denotes, Our fears in Banquo Stick deep, and in his royalty of nature Reigns that which would be feared. Then at the end of his soliloquy he really expresses his innermost thoughts by saying, Only for them, and mine eternal jewel Given to the common enemy of man, To make them Kings, the seed of Banquo Kings! This showed that he was determined that no- one would interfere with his kingship. Macbeth saw Banquo as simply too strong and honourable a rival to be left alive. Here again, we see that Macbeth and Banquo were closely linked. They were both tragic and doomed with flaws within themselves. Macbeth became obsessed by irrational passions, then anger and fear took hold, resulting in Macbeth having Banquo murdered. Macbeth held a banquet to celebrate his kingship which Banquo had agreed to attend as chief guest. He was indeed chief guest, but only visible to Macbeth as a ghost, taunting him, driving him insane with guilt. Macbeth felt this ghost was real, but it was only an extension of the evil in Macbeths troubled mind. This hysterical reaction in Macbeths vision aroused the suspicions of the lords attending. All this behaviour exhibited Macbeth as totally deranged, however, it was Banquo who finally exposed Macbeths deceptiveness by appearing to him as an avenging angel and deeply highlighting Macbeths guilt. There were contrasts in Banquos character. He was honourable to the King, yet, he was pathetic, unable to act when his suspicions of Macbeths evil were obvious. There is also evidence of contrast between Macbeth and Banquo in Act 2. I, when neither of them can sleep. Banquo was tormented by the Witches predictions and Macbeth was driven by them. Banquo really wanted what the Witches predicted, but at the same time he wanted to keep a clear conscience. He also observed how Macbeth changed from a loyal warrior into a self-seeking tyrant, but with everything happening so hastily he might not have had the time to act upon his suspicions and maybe he thought about the fact that his suspicions may have been wrong. Banquo clearly displays signs of ambiguity throughout the play.